ST1300 Specifications:
Engine Type:
| Liquid-cooled 4-stroke 16-valve DOHC 90° V-4 |
Bore x Stroke:
| 78 x 66mm |
Displacement:
| 1,261cc |
Compression Ratio:
| 10.8 : 1 |
Lubrication System:
| Wet sump, 5-qt. cap. |
Carburetors:
| PGM-FI electronic fuel injection, 36mm down draft throttle bodies |
Ignition:
| Computer-controlled digital transistorized with electronic advance |
Charging Output:
| 740 watts @5000 rpm. |
Maximum Power:
| 87kW 115hp 8,000rpm |
Maximum Torque:
| 117Nm 85fp 6,500rpm |
Transmission:
| 5-speed, hydraulic wet clutch. 2.57 1.72 1.29 1.04 .862 |
Final Drive:
| Enclosed shaft with integrated dampers, 2.833:1 |
RPM at 60 MPH:
| 3,200 |
|
Front Suspension:
| 45mm air-assist cartridge fork, 117mm 4.6" axle travel |
Front Wheel:
| Hollow-section triple-spoke cast aluminum 3.5 x 18 in. |
Front Tire:
| 120/70 ZR18 42psi |
Front Brakes:
| 310mm dual hydraulic disc, three-piston calipers, sintered metal pads |
Rear Suspension:
| Single shock with adjustable preload and rebound damping, 120mm 4.75" axle travel |
Rear Wheel:
| Hollow-section triple-spoke cast aluminum 5.0 x 17 in. |
Rear Tire:
| 170/60 ZR17 42psi |
Rear Brakes:
| 316mm hydraulic disc, three-piston caliper, sintered metal pads |
Frame:
| Aluminum-alloy triple-box-section pressure cast dual-spar with cast aluminum-alloy swing arm |
Rake / Trail:
| 26 degrees / 99mm 3.9 in. |
Weight:
| Dry: 291kg, 640lbs Wet: 319kg, 702lbs ABS +6kg +13lbs |
Load Capacity:
| 182kg, 418 lbs, 402 lbs abs. |
GVWR:
| 505kg, 1,118 lbs. |
Acceleration:
| 0 to 30 mph: 1.78 sec.; 0 to 60 mph: 3.84 sec. |
Top Gear Roll-On:
| 40-60 mph: 3.90 sec.; 60-80 mph: 4.42 sec. |
Braking:
| 30 to zero mph: 32.4 ft.; 60 to zero mph: 131.5 ft. |
沒有留言:
張貼留言
您好,感謝您的留言.有任何問題還是建議您親自到我們店址來,讓我們為您當面處理,謝謝您.